Portfolio

Gallery of the work of High Country Cabinet & Woodworking

 

Entertainment Center constructed of solid maple and maple veneers.  The unit is 8 feet tall and 9 feet wide.  The piece is 26 inches deep in the center and arcs back to 16 inches deep on the sides.  The top overhands by 6 inches on the sides and front.  The doors and drawer fronts are hollow torsion box construction, veneered on all sides.  Two of the shelves on each side are adjustable.

 

 

Bibliotheca - Large custom library, see article below.

Solid maple table and 6 chairs.  The clients wanted a South Western design a style that has been overdone recently, so I designed something that they would like and that I wanted to build.  I call this Spanish Colonial / Mayan with a Greene & Greene influence.  The pedestal is made of 8 pieces that were coopered together and the legs lap in the center.  Glue blocks were used to secure the legs to the base and the legs are glued and secured together with dowels, which do not show.  The top is 1 " thick were joined and glued together and because of the large size had to be planed and scraped by hand.  The chairs are constructed using mortice and tenon construction and the seats are attached to the top using counter bored holes on the inside of the seat apron.  The lazy Susan is made from the cut off sections of the table top.  The table and chairs were finished with linseed oil and turpentine followed by 3 thin coats of satin marine spar varnish.Maple Table and Six Chairs

 

 

 

 

 

 

 

 

        

 

Refirgerator Compressor Cover with Woven PanelAn alternative to a flat panel refrigerator cover.  I have made several of these, most of which were open to allow for ventilation, this unit is solid as the heat escapes from around the sides.  This went into an oak  kitchen that we redid by hand planing and sandblasting then staining and varnishing.  The grain on the 'woven' part all matched until it was cut.

 

Demi Lune Table(Click on thumbnail to view larger picture then use Browser Back Button to return to this page)  Demi Lune Table - constructed of spruce and pine and painted and grained to imitate crotch mahogany, crotch white birch and decorated with gold striping.  The apron, cut from solid stock, is  tenoned into mortices in the legs and the top is secured with screws on the inside of the apron.  The table measures 19 inches wide, 9 inches deep and 25 inches tall.

Small Cabinet - built for a small space and to match existing furniture.

Cigar Humidor - something to do with some left over veneer.

Kitchen Rework - These are the first pictures of an oak kitchen, entertainment center, vanities, laundry room cabinets and the front door.

April 2001 -House of Business Magazine, features a library & loft, kitchen and dining room table that were custom designed and built by High Country Cabinet & Woodworking.  Pages 72 to 79.  Hit Browser Back button to return.

Coffered Marquetry Ceiling - Here are the first pictures of a project using 24 existing Italian Marquetry panels probably made in the 1960's.

Computer Desk - This desk was built for a client that needed two work stations.  The concept and design was provided by a designer.

Nauvoo Temple - The original temple was destroyed in the 1840's and is being reconstructed as close to the original as possible.  Richard McDonald, master woodcarver is carving 53 wooden capitals for the interior.  Here are the first pictures.

Cherry Cloud - An 11 foot diameter feature for a commercial business.

Night Stands - A pair of alder night stands with hand dovetailed drawers, traditional design and construction.

Park City House - A selection of woodwork for a client including kitchen cabinets, beams, handrails, balusters and finials, vanities and painted doors.

 

Back to Top

High Country Cabinet & Woodworking

ilovewood.com

Hit Counter